Easy Maltesers Microwave Fudge Recipe | Kitchen Mason (2024)

FAQs

Why won t my microwave fudge set? ›

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

It sounds like your fudge simply wasn't heated enough. Fudge is basically a superconcentrated syrup, and it sets when sugar dissolved in the water (from the butter and milk) comes out of solution as the mixture cools and forms crystals.

It sounds like your fudge simply wasn't heated enough. ... If it's overcooked (resulting in grainy fudge) or undercooked (resulting in poor setting) all you really need to do is add a bit of cream, reheat the fudge to the target temperature, and let it set again.

there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

Cooking. Cooking is necessary to dissolve sugar crystals and to evaporate part of the water in the cream. The length of this step has a direct impact on the firmness of the fudge. As water gradually evaporates, sugar is concentrated and the temperature of the mixture rises above 100°C (212°F).

How can you fix soft fudge? Put it in a microwave safe bowl that is large enough that it won't boil over. Reheat it to the boiling point and cook for about 3 more minutes. Then you can beat some powdered sugar into it if this doesn't make it set.

What happens if I use sweetened condensed milk instead of evaporated milk in fudge? ›

Don't Substitute One for the Other

Thus, using condensed milk in a recipe that requires evaporated milk will yield an overly sweet dish.

Fudge can turn into caramel due to overcooking or undercooking, incorrect temperatures, or wrong ingredients.

Solutions to Save Your Fudge:

You can start by gently reheating it and boiling or cooking it again, aiming to reach the correct temperature. Alternatively, using short bursts in the microwave and stirring between intervals until it thickens can also be an effective method to restore its texture.

If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).

Good use of failed fudge: fudge that is too hard, too soft, too runny, too sugary, too chewy, etc. Proportions are as follows: for every 2 cups (roughly 1 pound yield) of any failed fudge that is not runny, you'll need 1 egg, ½ cup all-purpose flour, and ½ cup milk. If fudge is soupy, halve the milk (to ¼ cup).

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft. A temperature of 112°C to 114°C (234°F to 237°F) must be maintained. This will ensure the fudge has the ideal concentration of water and sugar. Fudge is difficult to make.

Pour the fudge back into your pan, and add about a cup of water to it, along with a tablespoon or two of evaporated milk, whipping cream, or whatever cream you're using. Some people skip the water and just add cream to the mixture to reheat.